sparkselectric2021@gmail.com

Farm & Agricultural Lightning Protection in Tomah, WI

Milking equipment, ventilation fans and bulk-tank compressors keep a farm running, and all of them depend on clean power. We build farm lightning systems around Tomah with those loads in mind, working from the Holmen shop.

Farm Lightning Protection Near Tomah, WI

In Tomah, 54% of homes date before 1980 and 23% since 2000, which on a farm usually means a newer house and an older barn that need to share one ground system. With 28% of Tomah homes on electric heat, farm shops and heated livestock areas follow the same pattern, and their feeders are worth protecting from surges.

Only 55% of Tomah households own their homes, and farm buildings are often leased, so we talk with the landowner and the operator together. Wisconsin Power & Light serves farms around Tomah. Our work stays on the customer side of the meter, and we coordinate with Wisconsin Power & Light if it comes near service equipment.

The city was founded in 1855 and takes its name from Chief Tomah, with Lake Tomah on the river at its west side.

What the work covers

  • Surge devices at every farm panel
  • Well pump circuit and control box
  • Milking parlor control circuits
  • Bulk-tank compressor feeder
  • Propane tank and piping bond
  • Existing cables, rods and connections

Permits and inspection in Tomah

Air terminals, conductors and ground rods are laid out to NFPA 780, while tying them into barn, shop and house grounds is electrical work handled through the municipality or DSPS. We confirm who issues and inspects the electrical permit for your property before work starts, whether that is the municipality or Wisconsin DSPS.

Farm & Agricultural Lightning Protection in Tomah WI

🚗 About 62 minutes away

51 road miles from our Holmen shop.

📞 (608) 871-1379

Free estimates in Tomah and Monroe County.

Grounding across multiple structures

Every building on a farm has its own electrode, and during a strike those electrodes rise to different voltages. Current then hunts for a path between them, often through a feeder or a water line. The cure is bonding. Lightning grounds are connected to each building's electrical grounding electrode and to the metal piping that crosses between structures, so the whole yard moves together. That tie-in is electrical work under NEC Article 250, so it is done by a licensed Wisconsin master electrician and inspected like any other circuit. We plan trench routes with you before digging. The written layout shows each connection point and cable run, so you can see where the ground is tied together before we dig.

Permits, inspection and the work plan

We begin with a walk of the property and a hand sketch of every building. From that comes a written layout, a sequence and a list of what we need from you, such as open gates and animals moved from the work area. Permits for the electrical bonding are handled by the town, city or village in Tomah where that office inspects, or by Wisconsin DSPS, the Department of Safety and Professional Services, where it does not. The lightning layout follows NFPA 780 and UL 96A. Work on several buildings can take a few days, and weather may shift the dates. At the end we walk the farm with you, point out each terminal and give you a copy of the layout for your records.

Wet fields in April can make trenching difficult, so we plan ground rods and cable runs around field conditions.

Learn more about farm lightning protection or see all electrical services in Tomah.

Farm Lightning Protection Questions from Tomah

Where do we start on a Tomah farm?

Call (608) 871-1379 or request an estimate online. We schedule a walk of the property, sketch each building and send a written layout before any work is booked.

Does every building need its own lightning system?

Each building is judged by height, roof type and what it holds. The main structures get terminals, and everything is bonded together so a strike has one planned route to ground.

Is a metal roof on my machine shed enough?

A metal roof conducts, but it does not guide current safely to the soil. The roof needs to be bonded to a ground system, and we add terminals and rods where the standard calls for them.

Call Sparks to plan lightning protection for your barns, bins and house. Call (608) 871-1379 or request a free estimate.

Farm Lightning Protection in Nearby Towns

More Services in Tomah

Sources

Free No-Obligation Estimate

Farm & Agricultural Lightning Protection Quote for Tomah

Tell us about your project and we'll get back to you within 1 business day. No pressure, no commitment — just honest advice from a licensed master electrician.

  • ✓ Licensed & insured master electricians
  • ✓ Upfront pricing — no surprise bills
  • ✓ Serving SW Wisconsin & SE Minnesota
  • ✓ Fast response — within 1 business day
📞
CALL US DIRECTLY
(608) 871-1379

Check Your Area →

Request Your Free Quote

We respond within 1 business day.

🔒 Your info is private & never shared. No spam, ever.